Will Quartz Stone Bleed?

Jun. 02, 2020

As a White Quartz Countertops Supplier, share with you. Quartz stone is the first choice for home improvement, it is a perfect combination of natural stone and artificial stone, and it is a higher breakthrough in decorative stone. Recently, everyone has paid much attention to the problem of the bleeding of quartz stone countertops. Whether or not quartz stone will penetrate, many merchants explain that it will not. The merchant will tell you that the surface of the quartz stone is smooth, without any capillary holes and small cracks. It is a brand-new artificial stone, which is completely different from the ordinary artificial stone production process, and is produced by a new die-casting process. This is one of the reasons why quartz stone manufacturers separate it from ordinary artificial stone.

Durable White Quartz Countertops

Durable White Quartz Countertops

Beautiful White Quartz Countertops uses a new production technology and process, quartz stone through vacuum (vacuum to reach -0.098Mpa above requirements), high pressure and high vibration to make the plate density reach 2.3-2.6g/cm3, water absorption rate is as low as 0.02% , So the liquid is difficult to penetrate into the inside of the plate. And the staff at the cabinet store will also give us some anti-permeation experiments. Many of them will think of using a marker pen. If they can wipe off, it means that the plate is impermeable, and some stores will even use a transparent container filled with soy sauce. Quartz-like pieces invade and continue to soak. However, some households will bleed the countertop board after using it for a period of time. What is the reason? What's so greasy in it?

If the bleed of your own countertop is serious, the price of the quartz stone you bought is cheaper and the quality is definitely worse, because the plate produced by the domestic brand quartz stone manufacturer cannot be seriously bleed. This is why you are taught to use a marker to make an experiment when you buy. You should use a dry rag to wipe the board vigorously before doing the experiment. Why should you understand why you want to wipe it! However, the penetration of rust water has little to do with the quality and density of the plate, because the plate itself is not zero water absorption rate, and rust water is very corrosive, and it is no exception to quartz stone, quartz sand itself is a natural mineral. A certain dilution of iron. Therefore, we should avoid contact with rusty irons in use, and after use, the table should be wiped with a dry rag to keep the table dry.

Our company also has Durable White Quartz Countertops for sale, please contact us.